|Item:||Beauty Tools Sterilizer|
1. This sterilizing pot is designed small and compact which can be
put on the desk, convenient to use
Maintain high temperature 150 degree with glass ball.
2. Best for metal tools, such as nails nippers and tweezers, salon
peelers, eye-brow beauty and tattoo needles
3. Only glass ball can be allowed to put into the inner pot of the
machine (Any liquid not allowed to put into the machine)
4. The sterilizer is an ideal beauty tools sterilizer for salon and
How to Use:
1. placed on a flat desktop.
2. open the lid, put the liner in the quartz sand, quartz sand
amount is not excessive (can not exceed 80% of the tank volume).
3. turn on the power switch, heating indicator light, while
disinfecting machine starts heating. (Red light indicates that the
power indicator light, green light, said heating)
4. the heating process from 0° to 250°, the heating time required 10-12 minutes, when the temperature
reaches 250°, the tools to be sterilized (such as: scissors, razors, etc.) into
the inner vertical quartz sand. (Note: You can not put a plastic
5. when the temperature reaches 250°, only 30 seconds to complete disinfection tool, remove the tool to
6. the heating process when disinfection interior temperature
reaches 200°, the green light will automatically turn off the heating,
sterilization machine stop heating; when the interior temperature
is lower than the set temperature, the green light will
automatically light heating, sterilization machine will
7. sterilization beads can be repeatedly reused, recommend 3-4
months for a change or when dirty.
8. this is a high-temperature sterilization machine, not hand
direct contact with disinfectant to avoid any hurt his hand.
Photo of products:
- 1 Piece x Sterilizing Pot
- 1 Bag x Glass Beads